|
Post by usbbdm on Feb 13, 2005 13:11:31 GMT -5
Here is a view of PH6 board The upper left is the label indicate the PH6 board. Right middle is the BDM connector. On right top is the capacitor need to be removed to disable the hardware watchdog.
|
|
|
Post by usbbdm on Feb 13, 2005 13:13:56 GMT -5
Here is the detail of the label.
|
|
|
Post by usbbdm on Feb 13, 2005 13:15:49 GMT -5
Here is the BDM connector!! You need to watch the pin direction.
|
|
|
Post by usbbdm on Feb 13, 2005 13:17:12 GMT -5
To use BDM, you need to disable the hardware watchdog, one easy way is to lift one of the pin of capacitor C105.
|
|