|
|
Post by DCTGoddess on May 17, 2005 20:40:52 GMT -5
Hi Everyone,
My diagnostics screen shows Firmware version 7.87. Would that complicate matters, since it seems 7.95 is what works now for you guys? Also, what does v7.95 have that v7.87 doesn't? Just curious.
Thanx,
DCTGoddess
|
|
|
|
Post by usbbdm on May 17, 2005 21:24:15 GMT -5
Hi Everyone, My diagnostics screen shows Firmware version 7.87. Would that complicate matters, since it seems 7.95 is what works now for you guys? Also, what does v7.95 have that v7.87 doesn't? Just curious. Thanx, DCTGoddess The version of firmware does not matter too much. They are very similar. Your provider can check the version and upgrade for you if needed. So if your company uses 7.87, stick with it. |
|
|
|
Post by patsfan on May 18, 2005 16:31:08 GMT -5
you may find that if you install a firmware version higher than what is used in your area that you will get no channels at all. not always though.
|
|
|
|
Post by adrianbv6 on May 18, 2005 16:50:31 GMT -5
not true firmware got nothing to go with it......
i have a box i treyd all the firmwares i get same channels all is the nvram
|
|
|
|
Post by patsfan on May 19, 2005 5:29:35 GMT -5
not true firmware got nothing to go with it...... i have a box i treyd all the firmwares i get same channels all is the nvram that's right. channels you get will depened on nvram. the wrong firmware in your area may cause problems with your box if there is an upgrade sent down from the cable company though. |
|
